Design, Build, Test, Iterate

Posts Tagged ‘chlorine’

DIY PCB Etching: Safety Lessons Learned

I wondered for a while about the title of this post, because I have actually learned very little in terms of safety. After all this, I know I’m still not going to use a fume hood, I’m still going to do this in my garage (albeit closer to the door), and I still won’t wear […]

DIY PCB Etching: Collecting Chlorine Gas (Read: DON’T)

tl;dr: There are much more efficient ways in which to produce chlorine gas than by electrolysis, so stop hoping and go buy some hydrochloric acid. I ultimately did not achieve anything practical by producing the gas. This post is only a log. Accidentally oxidizing my cuprous chloride solution Technically, it’s possible to turn a cuprous […]

DIY PCB Etching: Electrolyzing Salt to Produce Cuprous Chloride

tl;dr: You cannot produce an effective cupric chloride etchant using only salt, copper, and electricity. Yet I spent a week trying to do just that. Essentially, I wanted an effective etchant-producing method that didn’t require buying anything out of the ordinary. I mean, all the right elements were there (i.e., chlorine and copper). Unfortunately, other […]